- Windows 10 Sata Drivers Download
- Install Sata Drivers Windows 7 64 Bit
- Install Sata Drivers Windows 7 Gratuit
Dec 22, 2011 How to install SATA driver in Windows 7? Hi.when find a sata drivers for my laptop.i sow tutorial in microsoft forums and have a problem.i can find a hdd and to fix them needed sata driver.
Hello,
So I took the liberty of finally building my own computer, after a couple of hours of building it, cable management, and getting a new psu. I finally got it working, but I ran into problems with the Windows 7 setup. It wouldn't detect my hard drive, regardless of it showing up in the bios. I scanned my CD that came with the motherboard, and it didn't find anything.
I checked Western-Digital website, but no-dice.
Here's my specs, any help is appreciated.
CPU: AMD A8-6600K (Not OCED)
Motherboard: MSI A68HM-E33
Ram: PNY (1x8) DDR3 1600
HDD: 500gb Western-Digital Caviar-Blue at 7200rpm
GPU: Integrated Graphics
PSU: Insignia 520w
Any help is appreciated.
So I took the liberty of finally building my own computer, after a couple of hours of building it, cable management, and getting a new psu. I finally got it working, but I ran into problems with the Windows 7 setup. It wouldn't detect my hard drive, regardless of it showing up in the bios. I scanned my CD that came with the motherboard, and it didn't find anything.
I checked Western-Digital website, but no-dice.
Here's my specs, any help is appreciated.
CPU: AMD A8-6600K (Not OCED)
Motherboard: MSI A68HM-E33
Ram: PNY (1x8) DDR3 1600
HDD: 500gb Western-Digital Caviar-Blue at 7200rpm
GPU: Integrated Graphics
PSU: Insignia 520w
Any help is appreciated.
I have an Acer Aspire X3400. The HD just died. I popped in a new one and while trying to install Windows, when it gets to the point to choose what to do with the HD it’s just empty and it asks to upload the SATA drivers.
Windows 10 Sata Drivers Download
I have downloaded the drivers from the ACER website and made sure they are the correct ones (nVidia based chipset). The driver installer searches/finds the drivers and when trying to install it just goes back to point 1 (To upload the drivers).
I have tried:
-updating BIOS (it has the latest one)
-Physically checked all the SATA connections and made sure they are properly connected.
-I have removed the RAM for a a bit to make sure the RAM memory is not with old info.
-updating BIOS (it has the latest one)
-Physically checked all the SATA connections and made sure they are properly connected.
-I have removed the RAM for a a bit to make sure the RAM memory is not with old info.
Install Sata Drivers Windows 7 64 Bit
Any help will be appreciated!
Install Sata Drivers Windows 7 Gratuit
- I agree with Jim, most probably the HDD is not getting enough juice from PSU.
- Or If you have a brand new hardisk, you must partition the disk first and then formating the hardisk, before you use to install windows.
- It maybe SATA cable problem, have you try to use another SATA cable (a Good one) for your SATA drive.
- It maybe SATA cable problem, have you try to use another SATA cable (a Good one) for your SATA drive.
- Another possibility is that the PSU is failing and not providing consistent 5 and 12 volt supply for HDD maybe due to overheating. Is PSU fan working? When computer is off long enough to cool, you indicated that drive is detected. Only a drive that spins up and initializes will be detected by the system
- change in BIOS the HDD mode from AHCI to Compatible.how do you install Windows from dvd, usb key?
'A required CD/DVD drive device driver is missing' or 'A media driver your computer needs is missing' error message when you install Windows
http://support.microsoft.com/kb/2755139- Sometimes I get I/O errors about some hardware on the PC is not working properly. SO I started isolating the problems. I removed the DVD Drive and tried booting from a USB KEY.. it works but it get stuck on what I have explained in my very first post. Tried diferent HD and also the same..
- have you changed HDD mode in BIOS?
if you have another hard drive in the pc, remove that before install, also remove dvd drive and every non necessary usb connections.you can try to integrate drivers to windows 7 cd using RT Seven
http://www.rtwincustomize.net/index.php?option=com_content&view=article&id=3659:how-to-integrate-nvidia-and-ati-display-drivers-using-rt-seven-lite&catid=59:windows-seven-tutorials&Itemid=143intergrate DriverPack Drivers for Windows 7
http://www.youtube.com/watch?v=qYISAIrU7a0
- I would look at booting up with a Linux boot CD like SystemRescueCD as seen at http://www.sysresccd.org/SystemRescueCd_Homepage which would give you the tools needed to find out if the hard drive is seen by the system and if it can be formatted. If so you should be good to go. If not then maybe the drive is bad. The main thing would also be to check the BIOS to see if the low level hardware can see it or not. If not this would backup what you see in the boot CD. Good luck..
- I used HIrens Boot CD and the HD tested 100% ok. I haven't try formatting, I will give it a shot..
- Also, even though it normally is set to Master, check the jumper settings on the HDD itself. The jumpers are located usually near the other connectors of the drive; there are multiple pins with either white or black jumper connectors. The diagram usually is on the top of the drive along with the Manufacturer's name and other information. If the jumpers are set to Slave, then you should change it to Master.
- Unlike PATA HDD with master, slave and cable select settings, SATA HDD only use a jumper on pins 1&2 to reduce data transfer rate to 1.5GBytes/sec. Pins 2,3&4 of 4 pin block are only used for factory setup.
- Virtua tennis 4 free download. Correct the Serial ATA doesnt need jumpers.
- Is the HDD detected in the BIOS? Windows 7 has Sata drivers so the installer should detect the drive.
- When it gets disconnected from the power outlet for lets say 1 hour and I restart the system, BIOS will see it.. if I keep installing it will get to the same screen where you tell the system where you want windows to be installed.. then I chose the bigger partition and all disappears. Y tried from the BIOS the SATA option and also NATIVE IDE and nothing.I have tried Removing the DVD drive to see if theres a problem with the SATA ports and nothign happens. I have tried all the SATA ports.
- Does the drive show up in BIOS? If not, there is a problem with the connection somewhere, the drive is bad (yes, it can happen with a new device) or the SATA controller is shot. If the drive cannot be seen by the BIOS, it won't be seen by the operating system.When doing a fresh install, after installing vendor-specific disk drivers, the system does not always refresh the device list properly, so forcing a refresh will frequently populate the list with your drives.If you are still getting the same results and you can connect the old drive to another system as a slave or via a USB-to-SATA adapter, you may want to try that to see if the drive can be accessed. In that case, your drive may not have been bad, but your controller could be toast.